Cab Protection
Protect your Cab and Rear Window from Shifting Loads
BackracksTM are made to protect the cab and rear window from damage and secure cargo to prevent shifting loads. The stylish appearance is functional and attractive but made rugged to perform the toughest jobs. Powder coated, not painted, for maximum rust resistance. The Backrack can be installed within minutes and the accessory brackets proved and easy, convenient method of mounting warning lights onto the pickup truck without having to drill through the roof. Bedliner and toolbox friendly. Mill Supply carries a variety of stobe lamps to mount on your Backrack or truck.
Two Styles to Choose from
The ‘Bar Style’ Back Rack is a commercial grade cab guard/rack that offers a variety of convenient features to make life easier when you are working out of your pickup truck. Has two horizontal flat steel bars to protect the window. Designed to give you industrial strength cab protection while serving as a tie-down point to safely secure your cargo preventing any shifting of cargo and/or carry ladders. Warning lights easily attach to your Backrack where they are elevated higher for better visibility The stylish appearance is functional and attractive made with rugged steel and construction-built to perform the toughest jobs. Powdercoated not painted for maximum rust resistance; all hardware is yellow zinc coated for superior corrosion resistance. Easy No-Drill installation, Backrack is designed to bolt into existing truck bed stake holes eliminating the need to drill your truck (most application). Backrack is an excellent product for “do it yourself” mechanic.
The ‘Screen Style’ Safety Rack is a commercial grade cab guard/rack that offers a variety of convenient features to make life easier when you are working out of your pickup truck. Has welded wire mesh to provide full window protection, each intersection of wire is welded to avoid rattling and provide strength, and a wider/higher carrying capacity above cab. Built with 2”x2” pickled and oiled square tube, 3/16” diameter cold rolled wire on 2” centers and finished in black powder coated finish. This rack, like all Backrack products, is welded and assembled on state of the art robotic welding equipment. The Screen Safety Rack is mounted to the truck using Backrack’s unique mounting Railmount Brackets and Toolbox Brackets that give the Backrack strength and rigidity unmatched by competitors. Most installation requires no drilling. Warning lights attach easily with accessories.
ACCESSORIES
One of the reasons people like BACKRACKs so much is because they are made "accessory friendly". Whether you want to mount toolboxes, cargo, ladders, signal lights or antennas, BACKRACK has the accessory to get the job done. All brackets are coated with BACKRACK's durable powder-coat finish and all hardware is yellow zinc coated for superior corrosion resistance. Here are the items we carry in stock
A 39-130 (Drivers Side and 39-131 (Pass. Side)
Utility Light Bracket Drivers Side
10-1/2” Octagon Base.
Bolts to existing hole in upright.
Hole in base center to run wiring through tube.
Light sits at cab height just behind Rack.
May interfere with Toolbox opening fully.
B 39-132
Utility Light Bracket Center Mount
10-1/2” Base.
Clamps to Flat Bar on Horizontal Assembly.
Hole in base center to run wiring through.
Can be used with Safety Rack using longer bolts.
Light sits in center of cab in front of Backrack
C 39-135
Utility Light Bracket Center Mount.
16” x 7” Base.
Clamps to Flat Bar on Horizontal Assembly.
Hole in base center to run wiring through.
Can be used with Safety Rack using longer bolts.
Light sits in center of cab in front of Backrack.
D 39-138 (Drivers Side and 39-139 (Pass. Side)
Utility Light Bracket Drivers Side
6-1/2” Teardrop Base.
Bolts to existing hole in upright.
Hole in base center to run wiring through tube.
Light sits atop upright post towards truck cab.
